source "packages/third-party/gt_hmi/Kconfig"

#!/usr/bin/env bash
# setup_sdk.sh
#
# 用法（在目标工作目录中运行）：
#   bash setup_sdk.sh 7c      # 仅配置 7 寸屏 demo
#   bash setup_sdk.sh 101c    # 仅配置 10.1 寸屏 demo
#   bash setup_sdk.sh all     # 配置两种 demo（默认）
#
# 脚本与工程路径无关，clone 和拷贝均基于脚本运行时的当前工作目录

set -e

SCREEN="${1:-all}"
WORK_DIR="$(pwd)"

# -----------------------------------------------------------------------
# 目标路径（相对于脚本运行时的工作目录）
# -----------------------------------------------------------------------
PATH_7C="${WORK_DIR}/GT-HMI-Builder/GT-HMI Module/GTC-480800TFT70GP-AC"
PATH_101C="${WORK_DIR}/GT-HMI-Builder/GT-HMI Module/GTC-1024600TFT101GP-AC"
LUBAN_DIR="${WORK_DIR}/luban-lite"
ENGINE_SRC="${WORK_DIR}/GT-HMI-Engine"

# -----------------------------------------------------------------------
# 辅助函数
# -----------------------------------------------------------------------
copy_to() {
    local src="$1"
    local dst="$2"
    mkdir -p "$dst"
    if [ -d "$src" ]; then
        cp -r "$src/." "$dst/"
    else
        cp "$src" "$dst/"
    fi
}

# -----------------------------------------------------------------------
# 第一步：资料下载（git clone）
# -----------------------------------------------------------------------
echo "========================================"
echo " Step 1: 资料下载 (git clone)"
echo "========================================"

if [ ! -d "${WORK_DIR}/GT-HMI-Builder/.git" ]; then
    echo "[clone] GT-HMI-Builder ..."
    git clone https://gitee.com/genitop/GT-HMI-Builder.git "${WORK_DIR}/GT-HMI-Builder"
else
    echo "[skip]  GT-HMI-Builder 已存在，跳过 clone"
fi

if [ ! -d "${WORK_DIR}/GT-HMI-Engine/.git" ]; then
    echo "[clone] GT-HMI-Engine ..."
    git clone https://gitee.com/genitop/GT-HMI-Engine.git "${WORK_DIR}/GT-HMI-Engine"
else
    echo "[skip]  GT-HMI-Engine 已存在，跳过 clone"
fi

if [ ! -d "${WORK_DIR}/luban-lite/.git" ]; then
    echo "[clone] luban-lite SDK ..."
    git clone https://gitee.com/artinchip/luban-lite.git "${WORK_DIR}/luban-lite"
else
    echo "[skip]  luban-lite 已存在，跳过 clone"
fi

# -----------------------------------------------------------------------
# 第二步：工程创建 —— GT-HMI-Engine -> luban-lite
# -----------------------------------------------------------------------
echo ""
echo "========================================"
echo " Step 2: 拷贝 GT-HMI-Engine 到 luban-lite"
echo "========================================"

ENGINE_DST="${LUBAN_DIR}/packages/third-party/gt_hmi/GT-HMI-Engine"
if [ -d "$ENGINE_SRC" ]; then
    echo "[copy]  GT-HMI-Engine -> packages/third-party/gt_hmi/GT-HMI-Engine"
    mkdir -p "$ENGINE_DST"
    cp -r "${ENGINE_SRC}/." "$ENGINE_DST/"
else
    echo "[warn]  GT-HMI-Engine 目录不存在，跳过"
fi

# -----------------------------------------------------------------------
# 第三步：从 GT-HMI-Builder 拷贝 target / packages 到 luban-lite
# -----------------------------------------------------------------------
echo ""
echo "========================================"
echo " Step 3: 从 GT-HMI-Builder 拷贝模块文件"
echo "========================================"

setup_7c() {
    echo "--- 7 寸屏 demo ---"
    local src="${PATH_7C}"

    if [ ! -d "$src" ]; then
        echo "[warn]  7 寸屏路径不存在: $src"
        return
    fi

    if [ -d "${src}/target" ]; then
        echo "[copy]  target (7c) ..."
        copy_to "${src}/target" "${LUBAN_DIR}/target"
    fi

    if [ -d "${src}/packages" ]; then
        echo "[copy]  packages (7c) ..."
        copy_to "${src}/packages" "${LUBAN_DIR}/packages"
    fi
}

setup_101c() {
    echo "--- 10.1 寸屏 demo ---"
    local src="${PATH_101C}"

    if [ ! -d "$src" ]; then
        echo "[warn]  10.1 寸屏路径不存在: $src"
        return
    fi

    if [ -d "${src}/target" ]; then
        echo "[copy]  target (101c) ..."
        copy_to "${src}/target" "${LUBAN_DIR}/target"
    fi

    if [ -d "${src}/packages" ]; then
        echo "[copy]  packages (101c) ..."
        copy_to "${src}/packages" "${LUBAN_DIR}/packages"
    fi
}

case "$SCREEN" in
    7c)   setup_7c ;;
    101c) setup_101c ;;
    all)  setup_7c; setup_101c ;;
    *)
        echo "用法: bash setup_sdk.sh [7c|101c|all]"
        exit 1
        ;;
esac

echo ""
echo "Done. 接下来请在 OneStep 环境中执行："
echo "  cd luban-lite"
echo "  list          # 列出可用的 defconfig 方案，确认已拷贝的方案名称"
echo "  lunch <编号>   # 选择 defconfig 方案"
echo "  me            # 通过 menuconfig 进行配置"
echo "  m             # 编译"

sh setup_sdk.sh 7c      # 仅 7 寸屏
sh setup_sdk.sh 101c    # 仅 10.1 寸屏
sh setup_sdk.sh all     # 两者都配置（默认）

# 显示接口
CONFIG_AIC_PRGB_24BIT=y
CONFIG_RGB_DATA_MIRROT=y
CONFIG_AIC_PAN_DISPLAY=y
CONFIG_AIC_SCREEN_CROP=y
CONFIG_AIC_SCREEN_CROP_WIDTH=800
CONFIG_AIC_SCREEN_CROP_HEIGHT=480

# 触摸
CONFIG_AIC_USING_TOUCH=y
CONFIG_AIC_TOUCH_X_COORDINATE_RANGE=800
CONFIG_AIC_TOUCH_Y_COORDINATE_RANGE=480
CONFIG_AIC_SCREEN_REAL_X_RESOLUTION=800
CONFIG_AIC_SCREEN_REAL_Y_RESOLUTION=480

// RGB 24bit 引脚（PD.6 ~ PD.27，PC.0 ~ PC.5）
#ifdef AIC_PRGB_24BIT
    {3, PIN_PULL_DIS, 3, "PC.0"}, ... {3, PIN_PULL_DIS, 3, "PC.5"},
    {2, PIN_PULL_DIS, 3, "PD.6"}, ... {2, PIN_PULL_DIS, 3, "PD.27"},
#endif

// 触摸引脚
#ifdef AIC_USING_CTP
    {1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_RST_PIN},
    {1, PIN_PULL_DIS, 3, AIC_TOUCH_PANEL_INT_PIN},
#endif

# luban-lite 屏幕配置
Board option --->
	Display Parameter --->
		Display Panels --->
			[*] Custom Display Timing
			    display timing of simple panel --->

# luban-lite 触摸配置
Drivers options --->
	Peripheral --->
		Touch Panel Support --->

# GT-HMI-Engine demo选择
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->

# GT-HMI-Engine 屏幕配置
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->
			GT-HMI Engine configuration (gt_conf.h) --->
				Screen -->

# luban-lite 屏幕配置
Board option --->
	Display Parameter --->
		Display Panels --->
			[*] Custom Display Timing
			    display timing of simple panel --->

# luban-lite 触摸配置
Drivers options --->
	Peripheral --->
		Touch Panel Support --->

# GT-HMI-Engine demo选择
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->

# GT-HMI-Engine 屏幕配置
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->
			GT-HMI Engine configuration (gt_conf.h) --->
				Screen -->

# luban-lite 屏幕配置
Board option --->
	Display Parameter --->
		Display Panels --->
			[*] Custom Display Timing
			    display timing of simple panel --->

# luban-lite 触摸配置
Drivers options --->
	Peripheral --->
		Touch Panel Support --->

# GT-HMI-Engine demo选择
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->

# GT-HMI-Engine 屏幕配置
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->
			GT-HMI Engine configuration (gt_conf.h) --->
				Screen -->

# luban-lite 屏幕配置
Board option --->
	Display Parameter --->
		Display Panels --->

# luban-lite 触摸配置
Drivers options --->
	Peripheral --->
		Touch Panel Support --->

# GT-HMI-Engine demo选择
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->

# GT-HMI-Engine 屏幕配置
Local packages options --->
	Third-party packages option --->
		GT-HMI: Genitop HMI Engine --->
			GT-HMI Engine configuration (gt_conf.h) --->
				Screen -->